Anti-static hot-dip coated pipe has been processed by special process and has excellent antistatic performance. It can reduce the risk of fire caused by static electricity and is widely used in modern industrial production.
Anti-static hot-dip coated Pipe is made of high-quality thermoplastic material through special process processing. It has the characteristics of antistatic, high temperature resistance, corrosion resistance and wear resistance. Its process characteristics are mainly reflected in the hot-dip plastic technology. After the pipe is softened by heating, it is quickly immersed in the preheated thermoplastic powder to form a uniform coating. After cooling and curing, a solid protective film is formed to protect the pipe from external environmental erosion. It has good anti-corrosion performance and prolongs its service life.
Anti-static hot-dip coated Pipe is widely used in power, petrochemical, transportation and other fields. In the power industry, it can be used for cable maintenance, cable tray anti-corrosion protection, etc.; in the petrochemical field, it can be used for oil field pipelines, chemical equipment anti-corrosion protection, etc.; in the transportation field, it can be used for bridge coating, tunnel anti-corrosion, etc. Its excellent performance and wide application field make Anti-static hot-dip coated Pipe an indispensable and important material in the industrial field. It is hoped that all industries can actively adopt this advanced material to improve production quality and promote industrial development and progress.
1. The specifications and models
Pipe diameter range
Conventional models :D N15, DN40, DN60, DN80, DN100, DN125, DN150, DN200, DN300, etc.
Special models: Expandable up to DN800 and above.
Wall thickness range
The standard wall thickness is 2.0mm-6.0mm, including 2.0mm, 2.5mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, etc.
2. The type of material
Polyethylene (PE) coating: strong anti-corrosion performance, thickness range 0.5mm-2.0mm.
Epoxy resin (EP) coating: commonly used for anti-corrosion of inner wall, thickness 0.1mm-0.5mm.
3. The thickness of the coating
General Scope
Outer coating: Polyethylene (PE) thickness 0.5mm-2.0mm, DN≤600mm≥0.8mm, DN≥1800mm≥1.2mm.
Inner coating: polyethylene (PE) thickness ≥0.4mm (DN15-DN65).
Special requirements
Enhanced anti-corrosion: The coating thickness can be increased to more than 2.0mm, which is suitable for high-pressure or strong corrosion environments.
Flame retardant coating: The thickness and antistatic properties are optimized simultaneously to meet the needs of composite functions.
5. Other parameters
Adhesion: Coating adhesion ≥30N/10mm (achieved by special treatment of steel pipe surface).
Color identification: commonly used black, can also be customized gray, blue, etc.
Operating temperature: Applicable temperature range -15°C to 100°C
http://www.cangtiesteelpipe.com/